Tata Motors Parts Catalog

Tata Motors Nexon owners frequently seek replacement alloy wheels after accidental curb impact, severe pothole deformation, or when upgrading from standard steel rims on base and mid-tier trims. A structurally sound alloy wheel is essential for maintaining the Nexon's balanced ride height, steering precision, and braking performance under varied road conditions. Sourcing the correct rim ensures seamless fitment with your existing tire profile, brake calipers, and wheel hub assemblies.

Tata Motors Punch owners frequently seek a replacement front bumper following minor urban collisions, parking scrapes, or cracked mounting tabs on the distinctive micro-SUV front fascia. Because the Punch features a sculpted front profile with integrated lower cladding and specific lighting provisions across trims, getting an exact-fit replacement is essential. Our marketplace connects you directly with verified automotive spare parts sellers across India to source the right bumper panel for your vehicle.

Upgrading or replacing the wheels on a Tata Motors Nano requires careful attention to specific bolt patterns and offset dimensions unique to this compact rear-engine platform. Whether you are replacing a pothole-damaged rim or upgrading from factory steel wheels for better heat dissipation and aesthetics, selecting the correct fitment prevents suspension rubbing and steering instability. Sourcing through verified spare-parts specialists ensures you get the right rim specifications tailored to your exact Nano variant.

Whether replacing a curb-damaged rim on a top-spec Creative trim or upgrading from the factory steel wheels on a Pure or Adventure variant, Tata Motors Punch owners need alloy wheels that balance rugged micro-SUV styling with structural integrity. Because the Punch is frequently driven across broken roads and urban speed breakers, finding the correct rim profile, pitch circle diameter (PCD), and offset is vital to maintain suspension geometry and steering balance. Sourcing through our verified seller network ensures you get properly matched alloy wheels suited to your specific Punch model without fitment guesswork.

Due to the Tata Nano's compact front crumple zone and tight city maneuvering, its front bumper is often the first component to absorb impact from low-speed collisions, parking curbs, and road debris. Sourcing a direct-fit replacement ensures proper alignment with the front hood, headlamps, and fenders while maintaining the structural protection designed for your vehicle. Whether you drive an early standard model, a Twist, or a GenX variant, verified sellers on our network supply matching bumper options suited to your specific trim.

Tata Motors Altroz owners frequently search for replacement alloy wheels after encountering severe road impacts, rim bends from deep potholes, or when upgrading base steel wheel variants to factory-style alloys. Given the Altroz's ALFA-ARC architecture and sharp road manners, running structurally sound wheels is essential to maintaining steering precision, tire life, and high-speed stability. Sourcing through our platform lets you compare matching OEM and aftermarket wheel options from verified auto-parts distributors across India.

Whether replacing a single cracked rim after hitting a rough highway pothole or upgrading from factory steel rims to give your hatchback a sharper stance, finding the right alloy wheels for your Tata Motors Tiago requires balancing precise hub fitment with everyday road durability. The Tiago relies on exact wheel specifications to maintain its crisp steering feel, balanced ride quality, and stable high-speed manners. Connecting with verified spare parts sellers helps you source correct-spec genuine OEM designs or certified aftermarket alternatives without fitment guesswork.

Urban driving conditions and tight parking spots make the Tata Motors Tiago front bumper one of the most frequently damaged body components. Whether dealing with fractured mounting brackets from a low-speed impact or cosmetic scuffs requiring a fresh panel, sourcing an accurate replacement ensures proper alignment with the bonnet and front fenders. Connecting with verified parts suppliers helps you find the correct revision matching your Tiago's manufacturing year and trim level.

The Tata Motors Nano features a distinct single-arm front wiper setup designed to sweep a broad windshield area efficiently from a central pivot. Because this single motor carries the entire workload of clearing the windscreen during heavy monsoon downpours, internal gear wear or electrical burnout can immediately compromise road visibility. Sourcing a dependable replacement wiper motor assembly ensures your Nano remains safe and drivable in all weather conditions.

Finding the correct fog lamp for your Tata Motors Sierra is essential for maintaining safe road illumination in low-visibility conditions and preserving the classic front profile of the vehicle. Due to front bumper exposures, Sierra fog lamps frequently suffer from stone-chip cracks, internal reflector corrosion, or water ingress over time. Sourcing through our verified seller network ensures you get matched with a properly fitting assembly that aligns with your vehicle bumper specifications and wiring harness.

The rear bumper on your Tata Motors Tiago absorbs low-speed collision energy, shields the boot floor, and preserves the aerodynamic contour of the hatchback. Given typical Indian city driving conditions, it is one of the most vulnerable panels to rear-end nudges, curb scratches, and parking mishaps. Sourcing an accurate replacement ensures factory-level panel gaps and securely seats your reverse parking sensors and reflectors.

Finding the correct headlight assembly for your Tata Motors Nano is crucial for maintaining night-time driving safety and passing fitness inspections. Because the Nano features an ultra-compact front clip, its front lighting units are prone to minor parking scrapes, broken retaining lugs, and severe UV yellowing over years of outdoor parking. Sourcing a dependable replacement ensures clear illumination, correct beam throw, and clean alignment with the front bumper and fender line.

Tata Motors Altroz owners frequently need replacement wheel caps due to curb impacts, loose retention rings after tyre rotations, or displacement over harsh road potholes. Whether you drive an entry trim with factory steel rims or a higher variant needing a center cap replacement, selecting a secure-fitting cover restores your premium hatchback's clean exterior profile while guarding the hub spindle from grit. Matching your vehicle's specific wheel rim diameter and profile ensures a firm snap fit that will not detach at highway speeds.

Tata Motors Tigor owners frequently source replacement alloy wheels after pothole impacts cause rim bends, or when upgrading lower trim levels from standard steel wheels. Finding the correct wheel ensures your sub-compact sedan maintains its factory suspension geometry, fuel efficiency, and road stance. Our marketplace connects you with verified sellers across India to match the exact wheel specifications your Tigor requires.

Maintaining the three-cylinder Revotron powerplant in your Tata Motors Punch requires strictly adhering to recommended engine oil specifications to preserve fuel economy and low-end responsiveness. Punch owners frequently seek replacement engine oil during scheduled periodic services, after demanding city stop-and-go driving cycles, or when preparing for long highway trips. Connecting with verified suppliers ensures you obtain the precise viscosity and formulation needed to protect your engine against thermal stress and internal friction.

Tata Motors Indica owners frequently seek replacement alloy wheels to resolve curb rash, rim bends from heavy road impacts, or to upgrade from factory-fitted steel wheels. Because the Indica platform features specific wheel hub dimensions and offset tolerances, selecting the right rim ensures proper steering feedback and avoids suspension fouling. Our marketplace matches you directly with verified spare-parts sellers across India so you can find the correct specification for your vehicle.

The front bumper of your Tata Motors Nexon is the vehicle's first physical buffer against road hazards, minor low-speed bumps, and severe collision forces. Given the significant styling evolutions across the Nexon's production lifespan—including major facelifts with distinct lighting and grille architectures—sourcing the exact bumper design is crucial for a clean factory appearance. Connecting with verified parts distributors helps you secure the correct bumper cover tailored to your specific Nexon variant without fitment headaches.

The turbocharged Revotron petrol and Revotorq diesel engines in the Tata Motors Nexon generate substantial thermal stress, making proper engine coolant vital for long-term engine health. Whether navigating sluggish city commutes or cruising at highway speeds, maintaining fresh, correctly formulated coolant prevents hot-spotting, cavitation, and premature radiator wear. Sourcing the right coolant specification ensures your Nexon's aluminum cylinder head and cooling circuits stay free from internal corrosion and scale build-up.

The Tata Motors Altroz features a distinctive front fascia with sculpted body contours, making proper front bumper alignment crucial after bumper impacts or minor city scrapes. Sourcing a replacement front bumper requires verifying trim-specific cutouts for fog lamps and daytime running lights, as minor variations exist across the hatchback\'s production cycle. Car owners typically look for a replacement after fender-benders or when cracked mounting points prevent the panel from seating flush with the fenders.

Finding the correct front bumper for your Tata Motors Tigor is critical whether you are repairing city fender-bender damage or restoring alignment after highway impact. Because the Tigor underwent significant front-fascia styling updates between earlier iterations and the BS6 facelift versions, bumper mounting points, grille openings, and lower apron designs differ across production years. Submitting a quote request connects you directly with verified auto parts suppliers across India who can supply the exact bumper cover and trim components tailored to your car's generation.

Tata Motors Nano owners often look for steering replacements when city driving wear results in noticeable steering slack, harsh road vibrations, or clunking sounds over road irregularities. Because the Nano evolved from an ultra-light manual rack-and-pinion setup in its earliest variants to an electric power-assisted system in later editions, identifying the precise steering component is essential. Our platform links you directly with verified automotive spare-parts sellers across India, helping you find the exact assembly needed to restore precise directional control to your car.

Tata Motors Tiago owners frequently seek replacement fender linings after minor city scrapes, broken mounting clips from potholes, or severe monsoon wear. Because the Tiago's compact engine bay relies heavily on intact splash shields to keep road debris out of critical belts and wiring, replacing a cracked or sagging wheel arch liner is essential for long-term body and mechanical preservation.